用户登录
|忘记密码

新用户注册

登录

其他登陆



保存并执行控制台命令

作者:Dylbill
发布:gmsrt7
发布日期:2020-03-03 20:57:32
更新时间:2020-03-03 20:57:32
头像
2044
911 人收藏
3675 次下载
11677 次浏览
1.0
上古卷轴5:重置版
本地下载 高速下载 需要优先下载下载器,50%提速

描述

该mod允许您使用ConsoleUtil的静默执行功能在游戏中静默保存和执行控制台命令。您还可以让它们针对某些事件自动执行:加载游戏,战斗开始,战斗停止和位置更改。


如何使用

要保存命令,请转到MCM并选择一个列表。从“编辑命令”下拉列表中选择“设置新命令”选项。单击设置命令,然后键入要保存的命令。您可以将目标行为更改为“设置为十字线参考”,这会将控制台参考设置为十字线参考,然后再执行命令。您也可以使用“设置为无”,这将在执行命令之前清除控制台引用。这对于诸如TCAI之类的切换命令很有用。设置为无将清除参考,以便全局禁用或启用战斗。


设置命令时,可以使用以下文本使它们成为动态的:

TargetBaseID此文本将使用当前控制台目标引用的基本表单ID

TargetID此文本将使用当前控制台目标世界参考的表单ID

BaseID此文本将使用您当前十字线参考的基本表单ID

RefID此文本将使用您当前的十字准线参考的世界参考的表单ID


因此,例如,您可以键入以下命令:“ PlaceAtMe BaseID 1”,不带引号。将目标行为设置为“设置为十字线参考”,这将复制您当前的十字线参考。


另一个示例:键入“ Player.Additem BaseID 1”,不带引号,这将添加一个十字准线指向您的库存的项目。


您还可以设置命令的名称。例:

键入命令“ fw 0010E1F2”

输入名称“ Clear Weather”

它将在列表中显示为“晴天”,但执行fw 0010E1F2命令。

如果未设置名称,它将仅使用您设置为名称的命令。


要执行命令,请使用小功率或热键。使用时,它将弹出您为该列表保存的所有命令的列表。选择一个命令,然后退出列表菜单以执行它。要获取咒语,请单击您所在列表的命令咒语切换,以将咒语添加到咒语列表中。


通知选项选中时将显示命令结果的通知。因此,示例TGM在列表中执行时,将在屏幕左上方显示“上帝模式已启用”或“上帝模式已禁用”。


设置完所有设置后,单击“保存命令”选项。然后,您可以单击“编辑命令:”下拉菜单以选择以前保存的命令进行编辑或删除。


您还可以将列表中的所有命令保存到您命名的Json文件中,然后再加载它们,因此可以在两次保存之间使用它们。


请注意,这也适用于批处理文件。示例:假设您想向游戏中的任何NPC添加一堆物品。您将创建一个文本文件,将其命名为任意名称(例如AddItems),然后将其放置在天际主目录文件夹中。在您的文本文件中输入:

AddItem <ItemCode1> <Amount1>

AddItem <ItemCode2> <Amount2>等...


然后将命令设置为“ Bat AddItems”,不带引号。将目标行为设置为“设置为十字准线”。从列表中执行时,它将批处理文件中的所有项目及其数量添加到十字准线指向的NPC上。


兼容性

应该与一切兼容。


要求

SKSE64

天空UI

SkyUiLib:这是指向Skyrim LE的链接,它确实适用于SSE,并且是必需的。

ConsoleUtilSSE

PapyrusUtil


安装

解压缩到您的数据文件夹,然后检查您的加载顺序。


解除安装

在MCM中停用,然后取消选中您的加载顺序。


我的其他模组

————————————————————————————


Description
This mod allows you to save and execute console commands silently in game with ConsoleUtil's silent execution function. You can also have them automatically execute for certain events: Loading your game, combat start, combat stop and location change.

How To Use
To save a command, go to the MCM and choose a list. Choose the Set New Command option from the Edit Commands drop down list. Click on Set Command and type the  command you wish to save. You can change the target behavior to Set to Crosshair Ref, and this will set your console reference to your crosshair reference before executing the command. You can also use Set To None, and this will clear the console reference before executing the command. This is good for toggle commands such as TCAI. Set To None will clear the reference so that combat is disabled or enabled globally.

When setting a command you can use these texts to make them Dynamic:
TargetBaseID   This text will use the current console target reference's base form ID
TargetID    This text will use the current console target world reference's form ID
BaseID    This text will use your current crosshair reference's base form ID
RefID     This text will use your current crosshair reference's world reference's form ID

So, for example, you could type as the command: "PlaceAtMe BaseID 1" without the quotes. Set the target behavior to  Set to Crosshair Ref and this will duplicate your current crosshair reference. 

Another example: Type "Player.Additem BaseID 1" without the quotes and this will add one item of the type your crosshair is pointing at to your inventory.

You can also set the Name of your command. Example:
Type the command "fw 0010E1F2"
Type the name "Clear Weather"
It will show up as "Clear Weather" in the list but execute the fw 0010E1F2 command.
If you don't set a name, it will just use the command you set as the name.

To execute a command, use either the Lesser powers or the hotkeys. When used, it will bring up a list of all the commands you have saved for that list. Choose a command and then exit the list menu to execute it. To get the spells, click the commands spell toggle for the list you're in to add the spell to your spell list.

The notification option will show a notification of the command result when checked. So example TGM, when executed from the list, will show "God Mode Enabled" Or "God Mode Disabled" on the top left of your screen.

After all the settings are set, click the Save Command option. You can then click the Edit Command: drop down menu to choose a previously saved command to edit, or delete.

You can also save all of your commands in a list to a Json file, that you name, and later load them, so you can use them between saves.

Note that this also works for batch files. Example: let's say you wanted to add a bunch of items to any npc in game. You would create a text file, name it whatever you like, for instance AddItems, and put it in your skyrim main directory folder. In your text file put: 
AddItem <ItemCode1> <Amount1>
AddItem <ItemCode2> <Amount2>  ect... 

Then set the command as "Bat AddItems" without the quotes. Set the target behavior to  Set to Crosshair Ref. When executed from the list, it will add all of the items and their amounts in your batch file to the NPC that your crosshair is pointing at.

Compatibility
Should be Compatible with everything. 

Requirements
SKSE64
SkyUI
SkyUiLib :This is a link to Skyrim LE, it does work on SSE and is required.
ConsoleUtilSSE
PapyrusUtil

Installation
Extract to your data folder, and check in your load order.

UnInstallation
De-activate in the MCM and uncheck in your load order.

My other mods




原贴地址
1.版本号: 1.0   更新时间: 2020-03-03 21:03:40

选择快速回复类型:
  • 感谢
  • 支持
  • 疑问
  • 卖萌
  • 关心
  • 傲娇
评论


    作者精品
    logo

    保存并执行控制台命令


    Mod大小:71.58KB
    上传时间:2020-03-03 20:57:33

    Mod简介:

    暂无更多介绍

    本地下载
    选择快速回复类型:
    • 感谢
    • 支持
    • 疑问
    • 卖萌
    • 关心
    • 傲娇
    回复

    closeAD